6 pin led Connector 12mm Wide Unwired Gapless Solderless Strip to Wire Quick Connectors Adapter With 5m Extension Cord for Waterproof or Non-Waterproof RGB WW or RGB+CCT LED Strip Lights-10Packs

• Sufficient quantity: you will receive 10 pieces of 12mm 6 pin LED strip connectors and 16.4-feet 6pin 22awg LED cable, enough quantity to meet your needs in daily life for multiple use
• Working Stably:High quality tin plated copper core and PVC plastic wire cover ensure steady, safety and long-lasting connection, firmly bite through the led light strip, much stronger than old style lights connectors, The clear terminal is easier to pierce the wire, and the one-time success rate is higher.
• QUICK AND FLEXIBLE CONNECTION: Connect led strips to wire without stripping insulation, no soldering. The 6pin led light connectors are suitable for 12mm RGBW and RGBCCT LED strip lights, can also be applied to both non-waterproof and IP65 waterproof light strips. One end connects 6-conductor 22 gauge extension cable and another end for led strip. The led tape light connectors can not work with 10mm led strips, or 20 awg wire.

Those crystal connectors are made of high quality PC material,which uses upgraded design to make them suitable for waterproof or non-waterproof RGBW/RGBY LED light strips. Upgrade design does not need to be welded, the connection is firm and stable, the light strip never fall off. Suitable for 6PIN 12mm wide SMD5050 LED RGB CCT strip light. The sticker under the light strip does not need to be torn and the outer pvc of the wire does not need to be stripped when installation. Rated voltage: 0-36V Rated current: 5A Interface type: 6pin Working PCB width: 12mm Working environment temperature: -20~50℃ Installation Tips: 1. Cut the strips and wires to the length you need, and then fully open the clamp. 2. Push the strap in until it touches the backing, let the pins touch the connector, and then press down firmly to make sure the pins pierce the strap. (You can use tools such as pliers) 3. Push the wire into the wire end of the connector, and then press it down firmly to ensure that the pin pierces the wire sheath. (You can use pliers and other tools) 4. Reminder: both IP20 non-waterproof and IP65 waterproof light strips. You can pierce the light bar from the back or the front. The IP20 RGB light bar is recommended to be pierced from the front of the light strip, and the IP65 waterproof light bar is recommended to be pierced from the back without removing the silicone on the surface of the light bar. If you accidentally cover the connector, you can pry it off with a screwdriver. Package includes: 10 x LED 6-pin 12mm light strip connectors 1 xLED Extension cable Please read the size instruction carefully before purchasing. Not applicable to 10 mm/ 0.393 inches LED strips.