6mm Oak Faced MDF Board | 500 x 250mm (1.64ft x 0.82ft)

• ✅ Exact Panel Size: 6mm thick and cut to 500 x 250mm (1.64ft x 0.82ft). The smaller format is easier to carry, mark and trim for furniture repair work without handling a full trade sheet.
• ✅ Practical Use: Made for furniture repair where a veneered fibre panel can patch or replace a visible indoor section. The plain rectangular shape helps you plan straight cuts, repairs and fitted sections with less waste on small interior jobs.
• ✅ Plain Finish: Supplied with a plain oak veneer face, unfinished. It can be sanded, sealed, painted, stained or coated where suitable for the material and the final room conditions.
• ✅ Workable Material: The mdf core with oak veneer face can be cut and drilled with suitable woodworking tools. Support the 500 x 250mm panel during cutting to help keep the edge clean.
• ✅ Single Sheet Pack: Includes one rectangular panel only. Check the 6mm thickness and 1.64ft x 0.82ft size against your fixing method, frame depth and project opening before fitting.

The 6mm oak faced MDF board is cut to 500 x 250mm (1.64ft x 0.82ft) for furniture repair where a veneered fibre panel can patch or replace a visible indoor section. The MDF core gives a flat, stable base while the oak veneer face provides a natural timber look for visible indoor work. The face is plain and unfinished, so it can be lightly sanded and finished with oil, stain or clear coat after test application. The panel cuts with fine woodworking tools and works well for straight trims, small panels and neat repair pieces. Support the veneered face during cutting and seal exposed edges where the board may meet changes in room humidity. This single rectangular panel is intended for dry interior furniture, shelving and wall feature work, not exterior exposure. The 6mm thickness keeps the 500 x 250mm piece slim enough for overlays, facings and small decorative sections. The exact product is 6mm thick and 500mm long by 250mm wide, so the size can be checked before cutting, fixing or ordering for the planned furniture repair task. It is supplied as one plain rectangular panel with no decorative coating, no pre-drilled holes and no fittings included. Measure the opening, mark the cut line clearly and test the finish on an offcut where possible.