6 Pcs Pool Wall Plugs for Filter Pumps and Above Ground Pool Maintenance

• 6-PIECE BLACK SET: Includes six long black pool wall plugs for temporarily closing compatible filter pump openings during pool maintenance, filter cleaning and hose replacement tasks.
• FLEXIBLE RUBBER MATERIAL: The rubber construction can form a close contact around compatible pool openings, helping limit water flow while the pump, filter or connected hose is being serviced.
• DETAILED LONG-PROFILE SIZE: Each plug measures approximately 1.55 inches high, with a 2.3-inch bottom flange, 1.14-inch upper dome and 0.9-inch inner opening. Measure the fitting before ordering.
• FOR FILTER PUMP MAINTENANCE: Suitable for compatible above-ground pool wall ports when removing filters, disconnecting hoses or carrying out temporary cleaning and routine maintenance.
• REUSABLE REPLACEMENT PARTS: Six separate plugs provide replacements for several pool ports or future maintenance. Inspect each plug before use and replace it if the rubber becomes split, hardened or distorted.

This six-piece black pool wall plug set is designed for temporarily closing compatible above-ground pool filter openings during pump cleaning, hose removal and maintenance. Each long rubber plug has a wide bottom flange, raised upper dome and central opening, providing practical replacement parts for seasonal pool servicing and equipment care.Dimensions: Each plug measures approximately 1.55 inches in total height, with a 2.3-inch bottom flange, 1.14-inch upper dome and 0.9-inch inner opening for compatible fittings.Flexible Contact: The rubber structure can sit closely around a matching pool wall opening, helping reduce unwanted water movement while filters, hoses or pump components are temporarily disconnected.Practical Quantity: Six individual plugs can be distributed between several compatible ports, retained as replacements or stored with pool-maintenance tools for future cleaning and seasonal servicing.How to Use and CareSwitch off the pool pump and disconnect its power supply.Confirm that the pump and water circulation have stopped.Check the pool opening and compare it with the plug dimensions.Inspect the rubber for cracks, hardening or deformation.Clean away dirt and debris from the pool fitting.Align the long plug with the compatible wall opening.Press it into position using steady, even pressure.Check that the bottom flange sits evenly against the surrounding surface.Do not force the plug into an opening that is too small.Monitor the fitting while the pump or hose is disconnected.Do not operate the pump while the required water port is blocked.Remove the plug before restarting the filtration system.Rinse the plug with clean water after use.Remove chlorine, dirt and other pool residue promptly.Avoid sharp tools, strong solvents and abrasive brushes.Allow the plugs to air dry completely before storage.Store all six pieces in a clean, dry container.Keep away from direct heat and prolonged sunlight.