Northern DIY 6 Door Handle Springs, 1.4mm Wire, 3 Handed Pairs (2 + 1/2 Turn Coil)

• Door Handle Springs (2 + 1/2 turn coil). External Diameter 21mm. Made from 1.4mm diameter round wire
• 1 pack contains 3 Right Hand Springs and 3 Left Hand Springs
• 4mm side arms protrude at right angles to the coil
• A similar spring, but made from 1.65mm wire is also available - See additional photographs
• Suitable for the Rothley Brass G102/30 handle - See additional picture . More information in product description below

Door Handle Springs (2 + 1/2 turn coil). 1 pack contains 3 Right Hand Springs and 3 Left Hand Springs. External Diameter 21mm. Made from 1.4mm diameter round wire. 4mm side arms protrude at right angles to the coil. A similar spring, but made from 1.65mm wire is also available - click on 'visit the Northern DIY Store' by title to locate this spring. There are 2 extra photographs showing the 1.4mm and 1.65mm springs next to a stack of one penny pieces. If you don't have a micrometer this is a good way to determine the wire diameter of your existing spring. Tip: When fitting a new spring a little grease will give better wear and movement. This spring is suitable for the Rothley Brass G102/30 handle - See additional picture. It may suit other Rothley Brass models too. Models RB/G 100, RB/G 101, RB/G 200, RB/G 201 take our 1.65mm spring, but please double check the wire diameter (see photo with the coils compared with a stack of 1p pieces) just to be sure. As with any door handle spring, the spring must be pre-tensioned when the handle is horizontal. This is achieved by fitting the spring with the handle raised above the horizontal. If the handle is then lowered (winding up the spring), the cam washer should drop into place when the handle reaches the horizontal position and then keep the handle from springing up above the horizontal. The pictures for our similar 1.65mm spring may act as a guide to fitting (see separate listing).