50mm/2in PU Braked Swivel Castors Set of 8, Screw Fixing, Ball-Bearing

• Screw-down fixing for wood & boards – Supplied with Ø6 x 30 mm screws and washers for direct mounting to solid wood, plywood, MDF, chipboard, furniture and worktops. No access behind the mounting surface or separate nuts required.
• 50 kg / 110 lb capacity per caster – Each 2 in caster supports up to 50 kg / 110 lb. A four-caster base supports up to 200 kg / 440 lb on a flat floor, while the recommended working load on three casters is 150 kg / 330 lb for uneven-floor conditions.
• Smooth 360° swivel with total-lock brake – Precision ball bearings deliver smooth, quiet and low-effort rolling, while the total-lock brake secures both the wheel and swivel to help keep trolleys, workbenches, cabinets and other equipment firmly in position.
• Non-marking polyurethane tread – Durable PU wheels roll without leaving black marks or scuffs on hardwood, laminate, tile, vinyl, epoxy or polished concrete. The tread also resists oils, greases and many common workshop chemicals.
• Set of 8 for carts, furniture and workbenches – Includes 8 braked swivel casters with black powder-coated steel brackets for strength and corrosion resistance. Suitable for utility carts, furniture, workbenches, cabinets, toolboxes, display units and other mobile equipment.

FIXING TYPE: SCREW-DOWN. Supplied with Ø6 x 30 mm mounting screws + washers to screw the castors directly onto a wooden or board surface — no bolting through required. (A bolt-through version of this exact set is also listed — choose that one if you need to bolt through the surface with nuts.) Wheel Size: Ø50 x 22.8 mm (2" x 7/8") Overall Height: 71 mm Top Plate: 52 x 72 mm with 4 slotted holes (Ø8.3 mm) Bolt-Hole Centres: 35 x (49-55) mm (slotted for flexible fixing) Load per castor: 50 kg / 110 lb Total load on 4 castors (flat floor): 200 kg / 440 lb Safe working load on 3 castors (uneven floor): 150 kg / 330 lb Pack of 8 = up to 400 kg / 880 lb combined Motion: 360° swivel with total-lock brake (locks wheel + swivel) In the box: 8x swivel castors with total-lock brake; supplied with Ø6 x 30 mm mounting screws + washers Why the 3-castor rating matters: floors are rarely perfectly level, so a loaded trolley usually rests on only three of its four castors at any moment. Size your load to the 3-castor figure (150 kg) for a safe margin, not the flat-floor maximum. FREGAT Series 65 castors roll on hard-wearing polyurethane (PU) tyres fitted with precision ball bearings for an easy, quiet, low-effort roll. The PU tread is non-marking and leaves no scuffs or black marks on hardwood, laminate, tile, vinyl, epoxy or polished concrete. PU shrugs off oils, greases and most workshop chemicals and resists wear far better than soft rubber, so the wheels last longer and run more smoothly under load. The wheel core is tough white hard PP (polypropylene) plastic, while the swivel fork and top plate are black powder-coated steel for strength and corrosion resistance. Ideal for trolleys, furniture, workbenches, carts, cabinets, display units, toolboxes and DIY projects.