45cm (18"); 1.5mm; 0.325"; 72 TG bar + 4X Chain Compatible with Husqvarna Makita Oleomac Solo

• Cutting length: 45 cm ( 18'')(measured from guide bar tip to place where chainsaw housing starts)
• Drive link thickness (groove width): 1.5 mm
• Chain pitch: 0,325"
• Chain links: 72 pieces
• Guide bar thickness: 4,4 mm
• Compatible with: Husqvarna: 133, 136, 137, 140, 141, 142, 154, 234, 235, 238, 240, 240e, 242, 242XP, 246, 254, 254XP, 257, 261, 262, 338XPT, 339XP, 340, 345, 346, 346XP, 350, 351, 353, 357, 357XP, 359, 36, 365, 40, 41, 42, 435, 435E, 44, 440, 440E, 444, 445, 445E, 45, 450E, 455 RANCHER , 455E RANCHER, 460, 460 RANCHER, 50, 51, 55, 550, 560XP, T425 and many other

The set for chainsaw: 1 x chainsaw guide bar + 4 x saw chains / chain / replacement chain 45 cm / 1,5mm / 0,325" / 72 TG Compatible with: Husqvarna: 133, 136, 137, 140, 141, 142, 154, 234, 235, 238, 240, 240e, 242, 242XP, 246, 254, 254XP, 257, 261, 262, 338XPT, 339XP, 340, 345, 346, 346XP, 350, 351, 353, 357, 357XP, 359, 36, 365, 40, 41, 42, 435, 435E, 44, 440, 440E, 444, 445, 445E, 45, 450E, 455 RANCHER , 455E RANCHER, 460, 460 RANCHER, 50, 51, 55, 550, 560XP, T425 and many other Makita: 45, DCS430, DCS4300, DCS4300I, DCS4301, DCS431, DCS460, DCS4600S, DCS4630, DCS500, DCS5000, DCS5200, DCS5030, DCS520, DCS5200I and many other Oleomac: 850, 938, 940, 941, 942, 945, 946, 947, 950, 950 Super, 950A, 951, 952, 956, 962, 450570F and many other Partner: 360, 365, 400, 405, 4651200EL, 1400EL, 410EL, 460570F, 46570, 495, 500, 510, 540, 545, P500, P5000, P5500 and many other Solo: 639, 645, 647, 650, 651, 654, 941, 944 and many other GRAND, SCHWARZBAU, NAC, EUROTEC, EUROCRAFT, MATRIX, POWERMAT, MAGNUM, KSO, FLO, FLORA, HARDER, STEEL, DEMON, EINHELL and many other Dimensions: Cutting length: 45 cm (18")(measured from guide bar tip to place where chainsaw housing starts), Drive link thickness (groove width): 1.5 mm, Chain pitch: 0,325", Chain links: 72 pieces, Guide bar thickness: 4.4 mm Please always check your chain measurements before purchasing! Why our parts? The swords are made of certified steel of the best quality. Precisely designed and manufactured, our swords guarantee fine cutting and a long use time (at least 4 seasons). Why our chain? Chains have a special, abrasion-resistant coating that enables effective cutting even under difficult conditions. The cutting surfaces of the teeth are made of hard metal alloys. This means they stay sharp longer without additional sharpening compared to other chains. Small oil channels in the guide links absorb oil and transfer it to the chain joints. There is also an additional oil reservoir in these places, which ensures better lubrication and extends the life of the chainsaw. It is suitable for both tree pruning, surgical cutting and hard work that requires precision. The guide links have special bounce-reducing parts. NOTICE! Poor quality chain quickly dulls and the links come apart, causing them to fall off the bar and damage the drive and cutting system! The most important element in the chainsaw is THE CHAIN - good quality reduces fuel consumption and protects the equipment from failure!