4" Diamond Sponge Fiber Polishing Pad 300-10000 Grit - Polishing Tile Stone Marble Concrete Ceramics Glass 7set

• Packing: 4" Diamond Sponge Fiber Polishing Pad 300-10000 grit 7Set
• Diameter 100mm, total height 13.4mm, inner hole 14.5mm,wet polishing, can not be used dry
• Polished material: concrete, cement floor, marble, stone, tile,etc
• Nylon back velvet, strong adhesion, firm adhesion, can be torn repeatedly and not easily damaged
• The smaller the Grit size, the sharper it is, and the Grit size is used in turn from 300 to 10,000. The more the Grit size, the smoother

The polishing pad has an open mesh structure, good heat dissipation, high-speed polishing without burning the board, and long service life. It is made of high-grade diamond micropowder and polymer fiber. It is sharply polished, stone polished quickly, and has high brightness. The strong nylon back velvet has strong adhesion and firm adhesion. It can be peeled repeatedly and is not easily damaged. The product mesh number is printed on the back for easy identification during use. No burning, no dyeing, fast glazing, long life Semi-fine grinding 300# will remove the rough grinding marks, but will form new finer lines, and polish the machined surface more smoothly. Fine grinding: 500#~1000# The pattern, particle and color of the product after fine grinding have been It clearly shows that the surface is fine, smooth, and has a weak gloss. Fine grinding: 2000#~3000# The processed product has no visible traces, the surface is getting smoother and smoother, and the gloss is about 40-50 degrees. Polishing: 6000#~10000# Mirror polished, fast glazing, good effect, gloss can reach about 75~105 degrees. The diamond sponge polishing sheet has good heat dissipation effect and can only be used with water, dry grinding is prohibited. Microcrystalline stones, polished tiles, etc., which have a mirror effect, cannot be processed. If you want to remove the diamond sponge polishing sheet after sticking to the sticky disk, be sure not to pull it off with your hands in the vertical direction. Use a hard-pointed thin plate (or steel ruler) to insert into the gap between the magic hook layer of the sticky disk and the polishing sheet. In the middle, shovel or squeeze the polishing sheet.