30 Pieces (30/45/60 Degree) AFUNTA Vinyl Cutting Blade for Roland & Most Domestic and Imported Plotter with Blade Holder Base

• 30 BLADES: Compatible with Roland and most domestic and imported carbide plotters. High hardness, springs and blade support. 10 pieces for each degree.
• Application: fine polishing process, suitable for mahogany, wood, PVC colored cardboard, MDF and other precision embossing.
• 30 DEGREE: 30° blades are mainly used to cut very fine window shades and mylar materials.
• 45 DEGREE: 45° blades are the standard blades used on most vinyl cutters. They are recommended for all common cast and calendered vinyls as well as other thin materials such as ThermoFlex Plus.
• 60 DEGREE: 60° blades are recommended for thicker materials such as reflective films, flocked and twill materials as well as sandblasting resistance.

Features: Sheet Size: 24mm x 2mm (L x Dia) Holder size: 45 x 11 mm. Package includes: 1 x Blade Holder 10 x 30 degree cutter blades. 10 x 45 degree cutter blades. 10 x 60 Degree Cutter Blades Warm Tips: 1. The blade should not be too long, usually within half a millimeter, but it is better to pay attention to the elongated blade when carving small print, in order to prevent the blade holder from removing carved strokes. Small engraved print with new cutter and slower. 2. If the word is carved with the angle phenomenon, you need to change the blade to solve the problem. If the phenomenon persists after changing the blade, it should be the problem of the support. 3. If there is any problem with the knife holder, try to do it with a drop of oil in the bearing and turn the knife several times to grease it. If the bracket is still not resolved, you need to replace the knife holder.