3 x Hunter Rotator Nozzle + PROS 04 Housing Selection (MPCORNER = 2.5-4.5 m)

• Colour coded for easy identification
• The double extension function prevents dirt and small particles from entering the nozzle.
• A lower precipitation rate means higher efficiency
• Wind-resistant multi-beam technology
• Box contents: 3 x Hunter MP + 3 x Pros 04 housing – according to selection

The new MP Rotator series has been specially developed for even more efficient irrigation of small areas with distances of 1.8 - 3.5 m. The SR series offers the advantages of multi-beam and multi-outlet angle technology (MSMT) for such small areas as never before. The new MP800SR combines wind-resistant water jets and a high uniformity of water distribution with a nozzle protected by double risers and extreme resistance to solid particles and dirt. Realise water savings even on narrow surfaces. The MP800SR allows low irrigation rates of only 20mm/h, which is less than half the irrigation rate of traditional spray nozzles. Cover range of 1.8 - 3.5 m. Colour coded for easy identification. The double climbing function prevents dirt and small particles from entering the nozzle. The removable filter screen prevents large particles from clogging the nozzle. A lower precipitation rate means higher efficiency, wind-resistant multi-beam technology, partial circle and casting distance adjustable, operating data, recommended operating pressure: 2.8 bar, 280 kPa 2.8 bar, 280 kPa for maximum casting distances 2.1 bar, 280 kPa for reaching minimal Casting distances. For distances of less than 2.4 m, an operating pressure of 2.1 bar is used. Recommended to use with clean water MP800SR-90 has a built-in 60 mesh; 250 micron nozzle filter MP800SR-360 has a built-in 40 mesh; 4. 20 mic. 20 rons nozzle filter recommendation: use of a 150 mesh; 100 micron pre-liters for dirty water Hunter ACZ, PCZ, or ICZ drip zone filters are suitable