Aqua Quality AQ100 Water Filter Cartridge Compatible with InSinkErator F-701R and F-201R Hard Water Filter to fit ISE Instant Boiling Hot Tap Systems using the Neo Tank with A1 or A3 Head (3 Pack)

• The Aqua Quality AQ100 for InSinkErator water filter is interchangeable with the Genuine F-701R & F-201R replacement water filters. This filter has the same specification as the InSinkErator filter F-701R making it a much more economical solution.
• Removes chlorine up to 98% - dramatically improves the taste of drinking water for better tasting and aromatic beverages. Reduces particulates (sediment, rust etc.), turbidity and other unwanted tastes and odours.
• Built-in Scale Inhibitor - Reduces limescale and water hardness causing minerals (calcium & magnesium) via polyphosphate media to protect your equipment.
• The Aqua Quality AQ100 replacement water filter is compatible with any of the below systems using the "Neo Tank" with an A1 or A3 Filter Heads. Model Numbers: HC1100, HC2200, HC2215, H3300, HC3300, GN1100, GN2200, GN2215, 4N1 Touch
• It is also compatible with the following filter models; InSinkErator: F-201R, F-701R ¦ Finerfilters FF-40 ¦ Filterlogic: VFL-401 ¦ 3M: AP3-C765-S & SGP115-E ¦ 3M Aqua-Pure: C-Cyst-FF ¦ Aqua Quality: AQ100 ¦ Aqua House: AH-3P3 ¦ Springclear: Eco-SPC701 ¦ Waterdrop: WD-F701R

Product description Aqua Quality AQ100 Water Filter Compatible with InSinkErator F-701R. This filter is fully interchangeable with the InSinkErator F-701R & F-201R Water Filter and will fit both A1 or A3 filter heads. This filter has the same specification as the F-701R sold by InSinkErator making it much more economical solution. About this filter; Removes chlorine up to 98% - dramatically improves the taste of drinking water for better tasting and aromatic beverages. Reduces particulates (sediment, rust etc.), turbidity and other unwanted tastes and odours. Built-in Scale Inhibitor - Reduces limescale and water hardness causing minerals (calcium & magnesium) via polyphosphate media to protect your equipment. The Aqua Quality AQ100 Water Filter is compatible with any of the below systems using the "Neo Tank" with an A1 or A3 Head. It is also compatible with InSinkErator: F-201R. Legal Disclaimer Warnings: DO NOT install where water hammer conditions may occur. If water hammer conditions do exist you MUST install a water hammer arrester. DO NOT install if water pressure exceeds 120 psi. If water pressure exceeds 80 psi (552 kPa), you MUST install a pressure limiting valve. DO NOT install on a hot water supply. DO NOT install filters in systems where ambient temperatures may go above 100°F or below 40°F. Protect from freezing by removing filter cartridge where temperatures drops below 40°F. Where a backflow prevention device has been installed on a water system, a device for controlling pressure due to thermal expansion must also be installed.