2PCS Replacement Seals for Dometic 385311462 385310677 RV Toilet Seal Kit Replacement for Dometic Sealand Vacuflush 110 111 210 510 510H 511 Flush Toilets - Without Overflow Holes

• The rv toilet seal kit design for dometic 385311462 and 385310677 rv toilet seal reflects in the heavy duty teflon disk that with raised groove aligns match up for the black seal to prevent shifting of seals during installation, used to fix the issue of leakage
• 385311462 rv toilet seal is perfectly compatible with Domestic, Sealand pedal flush toilets and fit models as follows: 110, 111, 210, 510, 510H, 511, 711-M28, 711-98C, 712-TM09, 848, 910, 911, 2011
• 385311462 385310677 RV toilet seal replacement compatible with domestic sealand pedal flush toilets 506+, 511H, 547+, 548+, 706, 709, 748, 749, 806,808,847,848, 1147, 1148, 2010, 2011, 5006, 5047, 5048, 5049 VacuFlush: 168, 606, 647, 648, 1006, 1008, 1047, 1048, 1049, 1106, 5146, 5148, 5149
• When your toilet has the following symptoms, you need to replace the Dometic 385311462 toilet seal: unpleasant smell/leaking toilet/damaged old seal
• This RV toilet seal kit is made of high quality rubber well tested by the manufacturer, with higher efficiency, duribility and the best quality for a longer service life.

This replacement is new Improved RV Toilet Seal Kit contains 385311462 and 385310677 Heavy duty glass reinforced plastic ring with elevated channel aligns perfectly with black seal preventing misalignment of seals during the installation process It is commonly used to fix the issue of leakage Compatible with Domestic/Sealand/VacuFlush and others Replaces for 110,111,210,510,510H, 511,711-M28,711-98C,712- TM09,848,910,911,2011 Fit symptoms: Leaking/damaged Fit models: Dometic / Sealand: 506+, 511H, 547+, 548+, 706, 709, 748, 749 806, 808, 847, 848, 1147, 1148, 2010, 2011, 5006, 5047, 5048, 5049 VacuFlush: VacuFlush 168, VacuFlush 606, VacuFlush 647 VacuFlush 648, VacuFlush 1006, VacuFlush 1008, VacuFlush 1047 VacuFlush 1048, Vacuflush 1049, VacuFlush 1106, VacuFlush 5146 VauFlush 5148, VacuFlush 5149 Installation steps: 1.Turn off the water switch.Press the flush pedal to drain water from the toilet 2.Remove base cover 3.Lose the stainless steel strip and remove the plastic half clamp to connect the porcelain and plastic base 4.Tilt the porcelain bowl forward, grab the vacuum breaker attached to the back of the toilet, and pull it out of the toilet. Put the toilet aside 5.Remove original kit.Check flush balls for gaps, scratches or mineral deposits. Cleaning or replacement as necessary 6.Place the large plastic disc on the top of the thin seal, through a ring of thin seal raised in the center of the large disc. 7.Place seal and disk assembly on top of flush ball 8.Place the porcelain back on the toilet base, align the notch with the pin on the base, and align the bowl outlet with the flush ball. Then insert the vacuum breaker into the back toilet and push it into the rubber seal ring 9.Reinstall plastic half clip under loose steel strip, tighten stainless steel clamp 10.Reinstall pedestal cover, turn on water Package include: 1 x RV toilet seal kit