2 Pcs Indoor Wooden Wall Sconce, Motion Sensor Night Lights, Wooden LED Up Down Wall Lamp Dual Sensing Mode for Indoor Bedroom Hallway Stairway Living Room (Beech Wood Colour,Non-Linked Sensing)

• HIGH QUALITY MATERIAL: Linkage Sensor Wall Sconce is made of sapele wood.3000K warm white light, energy-saving and no flickering, protect your eyes. Built-in 500mAh lithium battery, when fully charged, it can last up to 8 hours in continuous light mode and 1-3 months in sensor mode. (Note: Only the Sabine wood colour is linkage sensing, the beech wood model is normal body sensing model.)
• SMART AUTOMATIC MOTION SENSING WALL LIGHT: Automatically turns on within 10 feet and turns off after 15 seconds if no movement is detected. Motion sensor + human infrared sensor. (Note 1: This light can only be turned on in a dark environment. It will not turn on if the light sensor detects enough light; Note 2: Only the Sabine wood colour is linkage sensing, the beech model is normal body sensing model.)
• Linked sensing mode: Linked sensing is possible at a straight line distance of 10 metres. Whenever you come home, the linked sensor light on the porch will light up, and the lights installed in the corridor, bedroom and bathroom will also light up automatically to illuminate the way ahead in advance. (Note: Only the Sabine wood colour is linkage sensing, the Beech model is normal body sensing model.)
• Easy to install: 1. Make sure the installation area is free of grease and dust before installation; 2. Tear off the protective adhesive protection on the back of the magnetic lead sheet, install the magnetic lead sheet in a suitable position, and then attach the sensor wall light to the magnetic lead sheet. (Note: Only Sabre wood colour is linkage induction, beech wood colour is ordinary human body induction model.)
• APPLICABLE PLACES: modern minimalist style, suitable for any decoration style, not only for stairs, bedroom, living room, corridor, porch, basement, dining room, hallway and other home places, but also for cafes, studios, exhibition halls and so on.

Specification: Colour: Sabine wood Colour, Beech wood Colour. Sabine wood colour: infrared human body sensor two-way luminous wall lamp - linkage models (i.e. induction mode, indoor straight line distance within 10 metres, one light the other will also light), magnetic design (built-in magnet), can be adjusted 360 ° light direction Beech wood colour: infrared human body sensor bi-directional light wall lamp - non-linked models Light source: LED light Light colour temperature: 2700K~3000K warm white light Lighting delay 15 seconds Sensing distance: about 3 metres Dual sensing mode: human body sensing + photosensitive sensing delay 15 seconds lights off, forward vertical sensing 2-3 metres, 120 degrees lateral sensing 3-4 metres Linkage distance: about 10 metres indoors Battery capacity: 500mAh built-in polymer lithium battery (a full charge, long-light mode can last 4 hours) Rated power: 0.4W Rated voltage: DC5V 1A Product material: solid wood, plastic, electronic components Standard equipment: induction lamp x 2, magnetising sheet x 2, charging cable x 1, English manual x 1 Product size: 73x56x28mm Packaging size: 76x61x 80mm Gross weight:150g IP rating:IP20 Execution standard:GB7000.204-2008, GB7000.1-2015 Switch control:ON:Long light mode AUTO:Linkage mode OFF:Close the night light Charging:Normal charging state indicator light long bright red, battery full indicator light off (TYPE-C charging port) Packing List 1: Sabine Wood Colour*2 Pcs (Linkage Sensor Model) OR Packing List 2: Beech Wood Colour*2 Pcs (Non-linkage Sensor Model) Note: Beech wood colour is a normal body sensor model, no linkage function; only Sabine wood colour has linkage function.