2 Pack Prop Flickering Flame Control for Led Light Fake Fire Effect Candles Lanterns

• 6 different flicker flame pattern modes of various average light levels and modulation levels with 10 speed steeps.
• Capable of fast flickering in the faster modes for dynamic flickering candle, lantern, and torch flame effects. At the fastest speed, the flicker light level can change across the pattern at a rate of 1 to 6 times per second with an average of about 3 times per second. The slower flicker speeds are well suited for glowing coal and ember effects with flicker speeds below 1 light level change per second.
• This control is for 12 to 24 volts DC (constant voltage) sytems.The control is equipped with DC barrel connectors of the 2.1mm x 5.5mm size with a positive +V center polarity. For low voltage DC LED lighting.
• Applications range from theatrical props to themed entertainment projects. For low voltage DC only. The maximum LED lighting load is 18 watts wattage. The maximum current at 12 volts DC is 1.5 amps.
• The control retains the last setting when power is removed or the control’s off setting is used. The control is well suited for building battery operated portable prop candles, lanterns and torches.

The Flickering Flame Control, FFC1, is used for simulated flame effects using low voltage LED lights. The intended application is professional use in theatrical and themed environments for various prop and scenery applications. The control has 6 dynamic flickering flame effects of various patterns, and one static (non-flickering) dimming mode. The control has 3 buttons which operate the functions: Mode button, to choose the flame flicker effects pattern. Speed button, to control the rate of the flame flickering rate. Light button, used to control the one static dimming mode and to control the on/off function of the control. The Flickering Flame Control is for low voltage LED lighting only. The control is for use in the 5.0 to 24 volts DC range. The maximum LED lighting load is 18 watts. The maximum load current at 12 volts DC is 1.5 amps. The control uses DC barrel connectors of the 2.1mm x 5.5mm size for power input and output. The control retains the last setting when power is removed or the control’s off setting is used. The control body has a length of 3 inches nominal, overall length including the cables is 13 inches nominal. The body of the control is 0.6 inches wide and 0.25 inches thick nominal. The PWM frequency of the control is 240 Hz nominal. For video applications this may cause video banding. Applications Western themed camp fire scenery props Theatrical stage simulated fire Themed entertainment projects Jack-o-lantern decor Faux fireplace building Coal basket props Cowboy cauldron fire pit props Glowing coal and wood ember fire simulation Blacksmith coal forge stage props Flicker flame torch props Flickering lantern props Amusement show projects Choir candles Theatrical stage hand candles Vintage lanterns Carriage light props Gas lamp props Performing arts theatrical flame props. Note: this control is for DC power sources and lights only.