2 Modes Bidet Shower Kit, Stainless Steel Bidet Hand Shower for Bidet Toilet Shower with T-Valve, 1.5m Shower Hose and Hand Shower Holder(Bidet Sprayer Set)

• 【MULTIFUNCTIONS】This toilet sprayer offers two spray modes (Jet/Stream), which you can change by turning the spray head. Flow mode is primarily intended for cleansing the intimate parts of the body. Draining water is more convenient, less splashing and you save toilet paper. Spray mode for cleaning the toilet, washing cloth diaper, washing your pet, etc.
• Easy installation and use: no drilling holes. Can be installed in minutes. Bracket and mounting material included. The adapter is G1/2 inch and the hose is 150 cm. We also provide 3/8" screws. You can easily switch between G1/2 and G3/8 interfaces. In case of leakage, put gaskets on the connections.
• 【High Quality Material】The bidet shower head is made of 304 stainless steel, which is not easy to rust, corrosion, scratch, high quality and durable.
• Environmental Protection: This bidet toilet sprayer uses water saving technology to reduce water and energy consumption; Flexible and handy design provides a perfect cleaning experience; The perfect combination of environmental protection and comfort.
• 【You will receive】Sprayer, G1/2 valve, G3/8 adapter, bidet hose and water tank hook. If you have any questions, please feel free to email us first. We promise to offer you the best solution. Don't hesitate and add to cart now!

Product information: Installation steps: Step 1: Turn off the toilet water supply and empty the toilet tank Step 2: Disconnect the flexible water supply pipe under the toilet tank. Step 3: Before you install the rubber gasket on the toilet tank, make sure the rubber seal is properly on the T adapter adapter. Then connect the flexible water supply pipe back to the bottom end of the T adapter Step 4:Make sure the rubber gasket at both ends of the metal hose is properly connected; connect one end of the hose to the open end of the T adapter and the other end to the nozzle. Step 5: Lift the lid of the toilet tank and hang the nozzle on the edge of the tank. Step 6: Open the valve of the water supply line (the valve was closed in step 1). Check for tightness and check again after 10 minutes. Use plumbing tape for leaky connections. What's in the box? 1 x bidet hand shower. 1 x 150 cm / 59 inch hose. 1 x holder. 1 x hook. 1 x G1/2 T-valve. 2 x G3/8 adapter.