Hot Tub Test Strips, 150 Strips for Hot Tubs, Spa, Pool Water Testing Kit Accurate 3 in 1 Quick Dip Tester 3 in 1 for pH,Total Alkalinity,Free Chlorine and Bromine

• 𝐏𝐀𝐂𝐊 𝐈𝐍𝐂𝐋𝐔𝐃𝐄𝐒 𝟏𝟓𝟎 𝐒𝐓𝐑𝐈𝐏𝐒: Supplied with 150 Blue Sparkle dip test strips designed for routine water checking, suitable for hot tubs, spas and ground pools, supporting regular monitoring as part of standard water care and accessories
• 𝐂𝐇𝐋𝐎𝐑𝐈𝐍𝐄 𝐏𝐇 𝐀𝐋𝐊𝐀𝐋𝐈𝐍𝐈𝐓𝐘: Designed to measure chlorine, pH and alkalinity levels, functioning as hot tub test strips 3 in 1 and ph test strips, helping identify water balance needs without requiring electronic ph tester devices
• 𝐒𝐓𝐑𝐈𝐏 𝐃𝐈𝐏 𝐔𝐒𝐄: Each strip is dipped into the water and removed immediately, then held level for 15 seconds before checking results, supporting simple handling during routine water testing without complex steps or tools
• 𝐂𝐎𝐋𝐎𝐔𝐑 𝐂𝐇𝐀𝐑𝐓 𝐑𝐄𝐀𝐃𝐈𝐍𝐆: Results are interpreted by comparing strip colour changes with the printed chart on the packaging, supporting clear understanding of chlorine and ph test readings for hot tub and spa water systems
• 𝐕𝐄𝐑𝐒𝐀𝐓𝐈𝐋𝐄 𝐖𝐀𝐓𝐄𝐑 𝐔𝐒𝐄: Suitable for hot tubs, spas, ground swimming pools and other controlled water setups, supporting use as a water test kit or general test strips for basic water condition monitoring

Product Description Pack of 150 Blue Sparkle Dip Test Strips are a quick and easy way to check chemical levels in your above ground pool or hot tub. Using the chlorine, alkalinity and pH testing strips to check water balance enables you to identify what chemicals need to be added to bring them within the correct parameters. Untested water can become home for bacteria and this chemical imbalance can harm your eyes and skin or cause you skin infection. Testing pool water with the dip strips couldn’t be simpler. Simply dip one of the water testing strips into your above ground pool or hot tub spa for 15 seconds, quickly remove it, hold it horizontally and check the results on the handy colour chart that’s printed on the back side of packet. The chlorine test strips also highlight water’s pH and Total Alkalinity levels. There are three separate sections on each strip to indicate each individual level. Chlorine levels inside an above ground pool should be 1 – 3 ppm (3 – 5 ppm for spas), pH levels should be 7.2 – 7.6 and Total Alkalinity levels should measure 80 – 100 ppm or 100 – 120 ppm, depending on the chemical solutions used to treat a pool. Directions Store at room temperature