100 x Drive-in Nuts M10 x 12 x 24 mm with 4 Drive-in Tips for Fixing Different Components of Furniture Manufacture

• So-Tech Drive-In Nuts M10 x 12 x 24 mm Pack of 100
• Material: galvanised steel / metric internal thread: M10 / height 12 mm / total diameter: 24 mm / sleeve diameter: 12 mm / edge thickness: 2 mm / tooth length: 8.5 mm
• With these drive-in nuts, e.g. furniture feet, furniture castors or adjusting screws can be screwed firmly. After assembly, they close straight with the surface. The four impact tips prevent the nut from twisting.
• Assembly: the sleeves are inserted into the pre-drilled component using a hammer. Thanks to the four prongs, the sleeve digs deeper into the material to be processed. This also allows a secure screw connection.
• Box contents: 100 pieces

SO-TECH drive-in nuts 100 pieces M10 x 12 mm With these drive-in nuts furniture feet, furniture castors or adjusting screws are firmly screwed. They close straight with the surface after the assembly. The four drive-in tips prevent the nut from twisting. Material: galvanized steel Metric internal thread: M10 Outside Ø: 24 mm Height: 12 mm Sleeve Ø: 12 mm Length of the drive-in tips: 8.5 mm Edge thickness: 2 mm Assembly: The nuts are inserted in the predrilled components by using a hammer. Thanks to the four tips, the nut gets deeply embedded in the component being drilled. Therefore, they enable additional safety to the screw connection. Scope of delivery: 100 pieces drive-in nuts