1 Litre Concrete Additive Frost Protection Plasticiser Concrete Additive

• Level + Concrete Additive Frost Protection RM35 – Recommended when the average daily temperature drops below 10 °C. Possible construction work with concrete in winter conditions, facilitates the curing of concrete, strong plasticisation capabilities, improves the Can be worked with. Efficient, facilitates the concrete compacting, increases concrete resistance, increases frost resistance, reduces the mixing time.
• Area of application: the concrete additive frost protection RM35 is intended for all types of flooring and cement compounds and floating screeds, surfaces with and without reinforcement, patio and balcony screeds. The concrete additive frost protection RM35 is used for plastification of all common and light types of concrete, for construction work at low air temperatures,
• The production of concrete with and without reinforcement, for prefabricated concrete parts with and without reinforcement, including coloured concrete and ready-made concrete. Area of application: the concrete additive frost protection RM35 is intended for all types of flooring and cement compounds and floating screeds, surfaces with and without reinforcement, patio and balcony screeds.
• The RM35 antifreeze concrete additive is used for plastification of all common and light types of concrete, for construction work at low air temperatures, the production of concrete with and without reinforcement, for prefabricated concrete with and without reinforcement, including coloured concrete and ready-to-use concrete.

Instructions for use: The product must be processed in the container before use. The concrete additive frost protection RM35 is to be added to the concrete mixture including mixing water and mixed precisely. Please note: With different cement types and their mixture content, a sample application must always be carried out. Please note: The RM35 Antifreeze Concrete Additive improves the conditions of setting and curing of concrete, providing the basic principles of concrete work at low temperatures are adhered. Always follow the general rules for concreting at low temperatures. The recipe of the concrete mixture must be adapted to the implementation conditions (suitable cement type and low water cement ratio). Water and aggregate must be warmed. Formwork and reinforcement must be free of ice, hoarfrost and snow. The formwork and the concrete surface must be heat-insulated and protected against the direct influence of negative temperatures, wind, fog and rain. During the setting and curing time, the temperature of the concrete mixture must not fall so deep that chemical reactions are interrupted. Technical details: Air temperature when used from -8 °C to +25 °C. Colour - Blue Consistence – Liquid pH - 6.5 - 8.5. Density [20°C] - approx. 1.06 g/cm3. Dosage quantity - from 250 ml to 380 ml / 25 kg cement, from 1.00 % to 1.50 % in ratio to the cement weight. Highest chlorine content - 8.00%. Highest content of alkali - 4.50%. Reduction of water in the test mixture ≥ 5% compared to the reference mixture. Pressure resistance: after 7 days and after 28 days: test concrete ≥ 110% of the reference sample. Air content/concrete mixture: test mixture ≤ 2% of the volume more than content in the mixture. Corrosion – the maximum corrosion current