1/4" Air Filter Regulator Compressor,Water-Oil Separator Trap Filter for Air Tool System

• Pressure reducer with pressure gauge 0-10 bar. The working pressure of the air compressor should be less than 10 bar.
• Drain interface from Kuper —— Longer life (Manual drainage)
• The drop structure adopts the gap seal shape, and the oil regulation is more stable and reliable
• Precision manometer with metal housing
• This air filter regulator can remove solid particles and condensates with compressed air and properly prepare air for many types of air tools and equipment.

Welcome to our shop! :) Our shop is a specialist shop for compressed air tools! If you have any questions, you can contact me directly. I will solve for you in any case. Our email address is: zhonganeur@163.com Product Description: The larger wheel is pressure regulator. Pressure setting: Pull up the pressure adjusting knob, turn it clockwise and the pressure increases. Turn counterclockwise and the pressure drops. Adjust the required pressure and press the push button to lock. The smaller wheel can set the oil drip. Adjust the oil volume: Turn the needle valve clockwise to decrease the amount of dripping Reduce oil. And turn the needle valve counterclockwise to increase the amount of dripping oil. After adjusting the airflow and adjusting the needle valve, the amount of oil droplets decreases with increasing airflow rate and as the airflow rate decreases. This air compressor regulator is very effective to control pressure to remove the moisture from air. You can also change the gas line pressure within the specified range by using Handwheel. It is very convenient to use and easy to use. Specification: Pressure gauge measuring range: 0-10bar Air intake: 6.35mm (1/4 ") Package Included: Luft 1x Air Filter Regulator Humidity Catcher Compressor Note: The working pressure of the air compressor should be less than 10 bar. Otherwise the filter will be damaged. It is best to wrap a layer of sealing tape on the threaded connection, and the sealing tape will not leak air at all. :) ▲▲Reversing the air inlet and outlet of the regulator will result in air leakage!▲▲